New Easy-Laser XT550 Ex/ATEX Laser Alignment System

NEW EASY-LASER XT550 EX/ATEX LASER ALIGNMENT SYSTEM

The XT550 alignment system has all the features of the XT660 with one major difference – the measuring units are intrinsically safe, which allows the system to be used in potentially hazardous areas.

The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans. The measuring units are approved in accordance with the latest ATEX directive*, and are rated both IP66 and IP67 water and dust proof.

Choose your own display unit
System XT550 comes in two configurations; with or without the ATEX approved ecom Tab-Ex® display unit. The XT Alignment app runs on most iOS and Android units, as well as our own XT display unit. However, those are not allowed in potentially explosive areas, but makes for a perfect complement for use in other places.

Note. For use in Ex-classed areas, the mobile device you’re using must be approved for these areas. Always check for approval labels before entering potentially explosive areas. The XT display unit is not Ex/ATEX approved.

*The XT50 measuring units are ATEX approved which means means they comply with the Essential Health and Safety Requirements relating to the design of products intended for use in potentially explosive atmospheres.

Display unit ecom Tab-Ex
Based on Samsung GALAXY Tab Active, ecom´s hazardous area tablet is certified for use in Zone 1/ 21 & DIV 1 hazardous areas.

Features
Glove-enabled touch-screen
Large 8″ display
ATEX approved

Measuring units XT50-M / XT50-S
The XT50 measuring units are ATEX approved for use potentially explosive environments. The units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
ATEX approved.
OLED display shows the angle of the unit.
Slideable target.
20 hours operating time.

A complete system contains
1 Measuring unit XT50-M
1 Measuring unit XT50-S
2 Shaft brackets with chains and rods
4 Rods 60 mm [2.36″]
2 Rods 120 mm [4.72″]
2 Extension chains 900 mm [35.4″]
1 Measuring tape 3 m [9.8′]
1 Rod tool
1 Charger (100–240 V AC)
1 DC split cable for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Ex/ATEX

SPECS : New Easy-Laser XT550 Ex/ATEX Laser Alignment System

Display Unit
Name
ecom Tab-Ex® 3
Type of display/size
TFT 8″ colour screen
Operating temperature
-20–55 °C
Communication
Bluetooth® 5.0 Wireless technology, WiFi
Camera
13 Mp with flash (rear), 5 Mp (front)
Dimensions
WxHxD: 263x162x26 mm [10.3×6.4×1.0″]
Weight (without batteries)
1100 g [2.42 lbs]
Operating time
Up to 11 h continuously
Operating system
Android™
ATEX/UKCA Ex classification
II 2G Ex db ia IIC T6 Gb IP64
II 2D Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55 °C
IECEx classification
Ex db ia IIC T6 Gb IP64
Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55°C
Ex certificate number
EPS 22 ATEX 1055X, IECEx EPS 22.0014X, EPS 22 UKEX 1055X

Measuring Units
Name
XT50-M / XT50-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20×20 mm [0.79×0.79″]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76×76.5×50.9 mm [3.0×3.0×2.0″]
Weight
316 g [11.1 oz]
OLED display
128×64 pixels
Operating time
Up to 20 h continuously
Ex classification
II 2 G Ex ib op is IIC T4 Gb, -10°C ≤ Ta ≤ 50°C
Ex certificate number
Presafe 17 ATEX 10552X, IECEx PRE 17.0049X