Minelab CTX 3030 Metal Detector For Sale
$3.000
WM module and detector compatibility:
WM 12 – GPZ 7000
WM 10 – CTX 3030
WM 08 – EQUINOX Series
Description
MINELAB CTX 3030 METAL DETECTOR
The waterproof all-terrain CTX 3030 is the ultimate high performance treasure detector. Discover more historical treasures with the most accurate target identification available.
TECHNOLOGIES
FBS 2
FBS 2 combines Minelab’s FBS multiple frequency rectangular-wave transmission (1.5 kHz –100 kHz) with advanced digital coil-to-detector communications. The precisely calibrated smart coils and detector electronics allow advanced signal analysis for more accurate detection.
SMARTFIND 2
Smartfind 2 greatly enhances Minelab’s FeCo Discrimination to analyse and display a target’s Ferrous (Fe) and Conductive (Co) properties on a full colour LCD.
Ultra-fast microcontrollers carry out digital signal processing to provide significantly improved target separation.
GPSI
GPSi uses the high performance and flexibility of a u-blox GPS positioning engine to seamlessly integrate location and time data with detector settings and target information. This creates WayPoint, FindPoint and GeoHunt files that are compatible with XChange 2.
WI-STREAM
Wi-Stream uses efficient low-power digital audio transmission to achieve no perceivable audio time lag (<10 ms) between the Wi-Stream enabled detector and the WM Wireless Module. With multiple channel capability, this wireless technology provides reliable communication with maximum sound quality.
Wi-Stream technology is offered in a range of Minelab detectors, however the WM modules are not cross compatible between detectors.
WM module and detector compatibility:
WM 12 – GPZ 7000
WM 10 – CTX 3030
WM 08 – EQUINOX Series
TECH SPECS
- Application : Coin, Relic, Jewellery & Beach (waterproof 10ft)
- Technology : FBS 2, Smartfind 2, GPSi, Wi-Stream
- Frequency/Transmission : Multiple frequencies: 1.5 – 100kHz
- Coil (standard) : 11-inch waterproof Double-D smart coil
- Audio Output : Built-in speaker, standard ¼-inch non-waterproof socket, custom waterproof socket (Minelab accessory headphones only)
- Headphones Supplied : KOSS UR30 (100 ohm) supplied with detector (non-waterproof )
- Visual Display : Full colour LCD with backlight and adjustable brightness (1–10)
- Backlight : Yes
- Product ID : 88961
- USB Connectivity : USB interface for XChange 2 PC software
- Memory : Settings saved automatically while detecting and remain until changed or reset
- Depth Indication : Accurate gauge active in normal detecting and Pinpoint mode
- Detect Modes : 10 fully customisable, including 5 preset (Coins, Beach, Relic, Silver & High Trash)
- Discrimination : Smartfind 2TM 2 dimensional colour discrimination: Ferrous 35, Conductivity 50 – 20 fully customisable discrimination patterns (2 per Search Mode)
- Timings : –
- Audio tone : Customisable Tone ID Profiles – 1, 2 ferrous (Fe), 2 conductive (Co), 4 Fe, 4 Co, 35 Fe, 50 Co or Combined
- Audio Type : Normal, Long, Smooth & Pitch Hold
- Ground Balance : Auto Compensation and Auto Ground Balance
- Ground Balance Type : –
- Trash Density : –
- Pinpoint : Non-motion with modulated audio and visual crosshair on LCD, 2 modes: normal and sizing
- Sensitivity Adjust : Auto and Manual (1–30)
- Tune / Noise Cancel : Manual & Automatic (11 channels)
- Threshold : Level adjustment (1–50), Pitch adjustment (1–30)
- Target Volume Adjust : Limit & Gain (1 to 30)
- Battery : Li-ion pack with fast charger. 12 V car adapter supplied with Standard Pack only
- Low battery alert : Audio & visual indication.
- Length : Min 37 in. (940 mm) – Max 55.3 in. (1405 mm)
- Weight : 5.20 lbs (2.36 kgs) including Li-ion battery pack
- Warranty : 3 years control box & coil
Reviews
There are no reviews yet.