Easy-Laser D450 Laser Shaft Alignment and Measurement Kit
$2.000
Simple to Operate
• Features Dual Laser System-each laser fires into the opposing sensor. Similar to reverse-dial method.
• No training required-follow on-screen instructions.
• Precision results in less time.
Description
EASY-LASER D450 LASER SHAFT ALIGNMENT AND MEASUREMENT KIT
Easy-Laser D450 is a basic system, with the performance and potential for expansion of our more advanced ones, for example D505 and D525. In fact, with the right accessories your D450 system can be converted into any other Easy-Laser system!
The general idea behind the system is “simplicity for the user”. All parts included in the system are developed for rough use and to be easy to mount on the machines. As a user you are given step-by-step instructions on the display through the entire measurement procedure. Even though the technology inside is rather advanced, the measurement principle is straightforward. It is based on the “reverse indicator method” with two laser/measuring units mounted on each side of the coupling.
System D450 includes two measurement programs: Horizontal shaft alignment and Softfoot. The displayed measurement resolution can be set as low as 0.05 mils/thou [0.001 mm]. When the measurement is complete you can produce a printout, save in the display unit or transfer the data to your PC.
Programs
• Simple laser shaft alignment.
• requires 180° of rotation.
Typical applications:
• Pumps, motors, gearboxes.
Simple to Operate
• Features Dual Laser System-each laser fires into the opposing sensor. Similar to reverse-dial method.
• No training required-follow on-screen instructions.
• Precision results in less time.
|
D450 Specifications (System) |
Display Unit D279 |
||
|
Programs |
Horizontal, Softfoot, Thermal Growth Compensation, Tolerance Check, Measurement Value Filter |
Housing material |
Anodized aluminum / ABS-plastic |
|
Measurement distance |
Up to 10 m [33 feet] |
Type of display |
Dot matrix LCD |
|
Temperature range |
0-50°C [32-122°F] |
Display size |
73×73 mm [2.87″×2.87″] |
|
Relative humidity |
10-95% |
Displayed resolution |
0.001mm, 0.05 mils/thou |
|
Max. displayed error |
±1% +1 digit |
Battery |
4 × 1.5 V R14 (C) |
|
Weight of System |
5 kg [11 lbs] |
Operating time |
24 hours |
|
Carrying case |
W×H×D: 420×320×110 mm [16″×12″×4″] |
Output port |
RS232 for printer |
| Memory | 1,000 Alignment Measurements | ||
|
Settings |
Contrast and unit (mil/thou/mm) |
||
|
Dimensions |
WxHxD: 180×180×45 mm [7.1″×7.1″×1.8″] |
||
|
Weight |
1250 g [2.8 lbs] |
||
 |
| D450 Specifications (Sensors) | Shaft brackets | ||
| Housing material | Anodized aluminum. |
Fixture |
V-fixture for chain |
| Type of laser | Diode laser. Class II |
Material |
Anodized aluminum |
| Laser wavelength | 635-670 nm. |
Shaft diameter |
Ø 20-450 mm [3/4″-18″] with standard chains. |
| Laser output power | <1 mW. | ||
| Max. Distance | 33 feet (10m) | Rods | |
| Type of detectors | PSD 0.39″ sq. (10 x 10mm.) |
Material |
Stainless steel |
| Linearity | ±1% + 1 digit over full range. |
Length |
60 and 240 mm [2.36″ and 9.44″] |
| Temperature range | 32-122°F (0 – 50 °C). | ||
| Relative humidity | 10% – 95%. | ||
| Dimensions | 2.4 x 2.4 x 1.97″ (60x60x50mm) | Cables | |
| Weight | 7 oz (198 g). | Type | With Push/Pull connection |
| Calibration | Not Required. Units self calibrate. | Length | 2 m [78.74″] |
Easy-Laser D450 System :
- (2) 10 x 10 mm PSD (laser/detectors) with 2m cables.
- (1) Display Unit D279 with firmware for alignment of horizontal machines and SoftFoot Indicator, Thermal Compensation, Tolerance Check and Measurement Value Filter.
- (1) Leatherette Cover for Display Unit
- (2) Fixture Bases with chain fasteners
- (1) Set 2.5″ Risers
- (1) Set of 9.5″ Risers, (2) 36″ Chain Extensions
- (1) Tightening Tool
- (1) Tape Measure
- (1) Carrying Case
- (1) EasyLink Windows based software and Communication Cable
Reviews
There are no reviews yet.